Be original in your presents make Handmade Greeting Cards

INTRODUCTION

Martha's friend genus Melissa Neufeld shared her technique for creating this nice picture-frame card that was galvanized by a vintage Victorian celluloid frame. Our pleated card is eight by twelve inches and fits into a 6-by-8-inch envelope.
MATERIALS

Two 9-by-7 sheets of paper (contrasting designs)
Transfer paper
Transfer tape
Picture frame card guide
Regular and crenated scissors
Wave cutter
12-by-8-inch piece of card stock
Hole punch
Brad
1/2-by-6 1/2-inch piece of 2-ply deposit board
Bone folder
6-by-8-inch envelope, optional
STEPS

STEP 1
Cut 2 9-by-7 sheets of paper from 2 different styles.
STEP 2
Adhere paper to back of 1 sheet victimization transfer tape. Attach the 2 papers, back to back.
STEP 3
Trace frame card guide on front of double-sided paper. Cut out victimization regular and crenated scissors.
STEP 4
Line up the four points of paper Associate in Nursingd use a wave cutter to chop an X.
STEP 5
Attach frame to card: Fold a 12-by-8-inch piece of card stock in [*fr1] to create a card (folded card are half dozen by eight inches).
STEP 6
Lay frame right aspect abreast of high of card. wherever you chop Associate in Nursing X within the middle of the paper, you may have four V shapes meeting within the middle. Pull the highest of the V back to fulfill the highest of the frame. Secure by punching a hole through frame and front of card.
STEP 7
Secure with a brad inserted front to back. Repeat for remaining three points, pull every to the skin edges of frame.
STEP 8
Keep card closed and trim concerning 1/2 outside the crenated a part of the cardboard to match the look. All the straight lines of the outside a part of the cardboard won't be cut.
STEP 9
Add the easel: Score a 1/2-by-6 1/2-inch piece of 2-ply deposit board with a bone folder, one 1/2 inches down from one shorter finish. Tape tripod to within front cowl of card in order that card are often cut in [*fr1] on the fold and also the front used as a frame.
STEP 10
To insert image within the frame, take away one in all the brads and slide in image. Replace brad.

About The Author

Founder of BeMozza

Related Posts